product catalogue | terminals | screwing technology | sak-series modular terminals | ts 32 | germin krg | modular disconnect test terminals | 4 mm2 - 1 - general ordering data order no. 0254120000 part designation sakt 4/lt o.stb version disconnect and modular disconnect terminal, 4 mm2, screw connection, krg, medium yellow, ts 32 ean 4008190130138 qty. 50 pc(s). product notes note, technical data two conductors with the same cross-section can be accommodated. 1.5 mm2 solid and 0.5...1.5 mm2 flexible function without stb note, accessories to safe the test sockets use the sdiz-blade (see chapter tools) or bits with pilots! additional technical data colour of insulating material medium yellow connection direction on side end plate required yes explosion-tested version "ex e" no installation advice ts 32 insulating material krg levels cross-connected internally no no. of identical terminals 1 no. of levels 1 no. of terminal strips per level 2 open sides right operating temperature range - 50 c, + 130 c product family sak series type of connection screwed type of mounting snap-on ul 94 flammability rating of insulation material 5va version test-disconnect terminals csa rating data voltage (csa) 300 v csa current 20 a min. cross-section (csa) awg 26
product catalogue | terminals | screwing technology | sak-series modular terminals | ts 32 | germin krg | modular disconnect test terminals | 4 mm2 - 2 - csa rating data max. cross-section (csa) awg 10 conductors for clamping (additional connection) flexible with ferrule, min. (din 46228 pt 1) 0.5 mm2 flexible with ferrule, max. (din 46228 pt 1) 4 mm2 conductors for clamping (rated connection) clamping range, min. 0.13 mm2 clamping range, max. 6 mm2 type of connection screw connection 2nd type of connection screwed connection direction on side no. of connections 2 stripping length 10 mm clamping screw m 2.5 blade size 0.6 x 3.5 mm tightening torque range 0.4...0.7 nm torque level with dms electric screwdriver 1 gauge to iec 60947-1 a3 solid, min. 0.5 mm2 solid, max. 6 mm2 stranded, min. 1.5 mm2 stranded, max. 4 mm2 flexible, min. 0.5 mm2 flexible, max. 4 mm2 flexible with ferrule, min. (din 46228/1) 0.5 mm2 flexible with ferrule, max. (din 46228/1) 4 mm2 awg conductor size, min. awg 26 awg conductor size, max. awg 10 awg conductor size, min. 0.13 mm2 awg conductor size, max. 5.26 mm2 dimensions width 8 mm height of lowest version 42.5 mm length 57.2 mm ts 32 offset 28.5 mm disconnect terminals cross-disconnect without integral test socket no slitting sliding torque level with dms electric screwdriver 1 rating data rated cross-section 4 mm2 rated voltage 400 v rated impulse voltage 6 kv rated current 32 a standards iec 60947-7-1
product catalogue | terminals | screwing technology | sak-series modular terminals | ts 32 | germin krg | modular disconnect test terminals | 4 mm2 - 3 - rating data current with max. conductor 41 a pollution severity 3 ul rating data voltage (ul) 300 v current (ul) 20 a min. cross-section (ul) awg 22 max. cross-section (ul) awg 12 approvals approvals institutes classifications etim 2.0 ec000902 etim 3.0 ec000902 eclass 4.1 27-14-11-26 eclass 5.0 27-14-11-26 eclass 5.1 27-14-11-26 similar products order no. part designation version 0310320000 sakt 4/lt stb2.0 disconnect and modular disconnect terminal, 4 mm2, screw connection, krg, medium yellow, ts 32
|